Testing your Devices when Joining a Sessionwire call as a Guest

Before joining a Sessionwire call as a guest, be sure to test your devices to ensure you're sending audio properly.

After clicking on the Invite Link URL and opening it in a compatible browser, follow these steps to test your devices:

1. Enter a your name in the field shown above.
2. Click Connect.
3. Set your Talkback and Camera settings appropriately
   1. Set up the Talkback Audio stream. Clicking the drop down arrow beside the Microphone button will present a menu with two halves. The top half is where you will select your Microphone - select a device that you know you can use to get your voice into the Sessionwire call. Most often a USB webcam microphone or an audio interface with a microphone plugged into channel 1 or 2 will work. (See image below - either a USB webcam or an audio interface with a microphone plugged into channel 1 or 2 can be selected as the Talkback Microphone)
      The bottom half is where you will select your Speaker - select a device that you know you can hear audio from. Most often this will be set to the built in output device or an audio interface. (See image below - an audio interface is selected as the Talkback Speaker)
   2. Set up the Video stream. Click the dropdown arrow beside the Camera icon. Select a camera or virtual camera device from the list. Most often this will be a USB camera, however virtual cameras like OBS Virtual Camera or EpocCam can be used. (See image below - a Cam Link 4K USB capture card is selected as the Camera)

    

4. Click Join Session.